The evaporator is split into serpentine coils. An expansion valve is provided for every two coils for improved refrigeration distribution.  Our competitors feed three coils with each expansion valve.  The coil bank can be split to operate from two different condensing units if desired. Externally equalized thermal expansion valves with remote sensing bulbs are used to maintain the superheat setting under conditions of changing load. Vertical suction risers are sized to return oil to the compressor. Coils are filled with dry nitrogen prior to shipment

Double bank-direct expansion systems are available for 45,000 lb ice capacity and larger units. Each assembly is independent in operation and can be supplied by a separate condensing unit.   However, These systems can be plumbed for use with one large condensing system if desired. Two coil banks are used to reduce pressure loss and increase operating efficiency. As with the single bank model, the coil assemblies are filled with dry nitrogen prior to shipment.

The tank is fabricated from 1/4" thick steel plate.

All tank seams are double welded inside and out and then tested for leaks.

Tank bottom is constructed of double steel plate with insulation in between.

Heavy duty structural steel stiffeners are used for the tank walls, corners and top and bottom perimeters to prevent tank distortion and to provide a rigid assembly.

The exterior structural steel and the tank interior are coated with zinc dust primer.

Polystyrene insulation board is used on the exterior of the tank walls and floor, then covered with stucco embossed aluminum sheet metal.

The tank exterior is furnished with jacking and lifting lugs for handling.

The embossed aluminum top covers are formed in sloping sections and are designed for self draining.

The coils are constructed from Schedule 40 black iron pipe meeting ASME/ANSI B31.5 standards.

Air distribution pipes are located in between each serpentine coil circuit for even air agitation throughout the tank.

A high efficiency, compact, low pressure blower is provide for air agitation.

An optional automatic liquid level control can be mounted in the tank. The level sensor is protected from the air agitated movement of the liquid. The relay is mounted in an waterproof enclosure.

Ice bank control senses ice based on conductivity, temperature or both.

All models are constructed from the finest materials and fabricated with pride in workmanship.

TO FULL FLOODED LATENT HEAT STORAGE UNITS
TO PRODUCT PAGE